1. High coverage.
2. Low viscosity.
3. Hard wearing.
4. Good epoxy injection for repairing cracks of
5. Excellent adhesion.
FIELDS OF USE
Novo EP Adhesive is used as
1. Prime for marble back .
2. Injection epoxy for marble cracks.
3. Dust Proof floor coating in warehouses and
4. Sealer for porous concrete surface.
PROPERTIES @ 25 C°
Solid content by (WT) 100 %
Mixing Ratio 2A: 1 B
Specific gravity (mix) 1.08 ± 0.03
Pot life 30 -45 min
Full curing time 7 days
Rate of use 5- 7 m2/ kg
Shelf life 12 months in suitable
One year under suitable storage conditions.
Avoid direct sun on storage.
Group = 3 kg
DIRECTIONS OF USE
Incase using as prime for Adhesive marble
✓ Marble back preparation
- The substrate must be clean, sound and free from all contaminants that may affect the adhesion strength like dust, oils and grease, wax, cement laitance, and any other contaminants must be removed by blasting or suitable release agent.
- Any excessed dust should be removed before applying novo EP Adhesive
✓ Mixing and application
- Add comp B (ensure all liquid of comp B is added)
to comp A and mix well manually or by using very slow mixer.
✓ Application method:
- It is applied by brush & roller or spray (Air spray, Airless spray).
- It is diluted by Novo Sol 13 not more than 3 % if required (not diluted in case it is used as an injection)
HEALTH AND SAFETY
• Wear protective clothes, gloves, glasses, and face
• Keep away from sources of agitation.
• No smoking during work.
• Good ventilation in case of spraying application.
• For skin contact, remove it with suitable cream
followed by soap and water cleaning.
• For eye contact rinse with plenty of clean water then
ask for medical advice